Top 10k strings from Backupz (1988)(Patman).z80 in <root> / bin / z80 / software / Sinclair Spectrum Collection TOSEC.exe / Sinclair ZX Spectrum - Utilities & Educational / Sinclair ZX Spectrum - Utilities & Educational - [Z80] (TOSEC-v2007-01-01) /

Back to the directory listing

   2 ;"OR 0-TAPE"
   1 Z0  D< 0DD
   1 Saved from:
   1 Program length:
   1 PRINT file:
   1 Auto-start:
   1 Array name:
   1 ;"you manage to blow you Z88";
   1 ;"you do not specify a name at";
   1 ;"transfered under."
   1 ;"the files to disc etc."
   1 ;"the Z88 end, the file will be";
   1 ;"the Spectrum to the Z88, if";
   1 ;"soldering iron!"
   1 ;"shorted together at the Z88";
   1 ;"saved under the name it was";
   1 ;"rate of both the Z88 and the";
   1 ;"order from Maplin, Phone";
   1 ;"or other good electrical/";
   1 ;"on each plug together. But";
   1 ;"of these at your local Tandy";
   1 ;"mind your fingers on the";
   1 ;"machine!"
   1 ;"just link the following pins";
   1 ;"files on your Tape/";
   1 ;"end. NB make sure you mark the";
   1 ;"correct plug into the correct";
   1 ;"computer shop. Or via mail";
   1 ;"bring this higher.";
   1 ;"back-up copies of your Z88";
   1 ;"and/or your Spectrum up."
   1 ;"accept no responsibility if";
   1 ;"Z88-SPECTRUM LEAD"
   1 ;"Z88 plug, so you insert the";
   1 ;"Z88 - Spectrum"
   1 ;"Z88 - SPECTRUM";
   1 ;"You should be able to get most";
   1 ;"Warning. When transfering from";
   1 ;"Two male 9 pin D plugs";
   1 ;"Spectrum - Z88"
   1 ;"Spectrum (9600) but you could";
   1 ;"Select an option (1,2,3 or 4)"
   1 ;"SET UP Z88, USE R TO RECEIVE";
   1 ;"SAVING..
   1 ;"SAVE TO WHICH DRIVE (1-8)";
   1 ;"Remember to set the Parity to";
   1 ;"READY FOR TRANSFER"
   1 ;"Press any key"
   1 ;"Press any key for Main Menu"
   1 ;"Pins 2 and 8 need to be";
   1 ;"PRESS ANY KEY WHEN READY"
   1 ;"NONE at Z88 end."
   1 ;"Microdrive."
   1 ;"Making the lead is dead simple";
   1 ;"LOAD FROM WHICH DRIVE (1-8)";
   1 ;"Items you'll need:-";
   1 ;"INPUT FILENAME
   1 ;"FILENAME TO LOAD
   1 ;"By changing lines 1100 and";
   1 ;"Belt any key for the Main Menu"
   1 ;"BACKUPZ uses the default BAUD";
   1 ;"BACKUPZ allows you to keep";
   1 ;"BACKUPZ - 
   1 ;"BACKUPZ  NOTES"
   1 ;"AND ENTER A FILENAME";
   1 ;"A wire cutter/striper";
   1 ;"A lenght of 5 core cable";
   1 ;"A Soldering iron (and solder)"
   1 ;"7  -  7";
   1 ;"5  -  5";
   1 ;"4. Notes";
   1 ;"4  -  4";
   1 ;"3. How to wire the cable";
   1 ;"3  -  3";
   1 ;"2090, you will be able to save";
   1 ;"2. Spectrum to Z88";
   1 ;"2  -  2";
   1 ;"1. Z88 to Spectrum";
   1 ;"0772 552911."
   1 ;"""Works for me"", but I can";
   1 1988 Patman"
   1  ** Patman - 7:2:88
   1  ** If you have any problems or  ** questions about this program ** please MBX me on 206866969.  **
   1  ** Any ideas for another Z88    ** program? Then MBX me!